Jump to content
Dr Archeville

Science!

Recommended Posts

Ah, yes. Gotta love those non-Newtonian fluids. Cool stuff.

I didn't know there was a general category for these things. What else is a non-Newtonian fluid?

Share this post


Link to post

I didn't know there was a general category for these things. What else is a non-Newtonian fluid?

Motor oil, ketchup, synovial fluid, and any other liquids whose viscosity changes as stress is put on them.

Share this post


Link to post

Corn starch (or something) mixed with water is also non-Newtonian. That was awesome at first I thought it would act like a liquid but what actually happened was much cooler. :clap:

Share this post


Link to post

:cry: :cry: :cry:

The video link is no longer loading properly.

...I hadn't wondered what would happen... but now I do.

Share this post


Link to post

The video link is no longer loading properly.

...I hadn't wondered what would happen... but now I do.

Huh. She still workee for me. *shrug*

In any case, the big ball of Silly Putty shatters, pretty much as though it were ceramic. Then, the professor gives a pretty good explanation of why.

Share this post


Link to post

The ZSG actually claims that the excess food will actually simply burst from their stomachs once the pressure builds up, as their intestines are no longer operational.

Share this post


Link to post

"Every once in a while, science rules."

Nope. Science rules every minute of every frickin' day.

Share this post


Link to post

7 Man-Made Substances that Laugh in the Face of Physics (note: Cracked.com article)

The List:

Ferrofluids

Aerogel

Perfluorcarbons

Elastic Conductors

Non-Newtonian Fluids

Transparent Alumina

Carbon Nanotubes

Sadly, there is no mention of Flubber.

Not sure if cracked.com is nsfw or not so i'm not going to click it.

This seems more like a list of categories. Like I now know that Non-Newtonian Fluids encompass a variety of things. What's special about these other ones?

Share this post


Link to post

It's like late-night Spike TV, though with less scantily-clad women.

Ferrofluids: T1000

Aerogel: fireproof superstrong foamed air

Perfluorcarbons: fluid you can breathe

Elastic Conductors: Screens that can be rolled up

Non-Newtonian Fluids: flexible body armor

Transparent Alumina: windows for the USS Enterprise

Carbon Nanotubes: nanotechnology

Share this post


Link to post

Perflourocarbons are something that we looked at in Respiratory Therapy... the site is a wee bit inaccurate about that stuff. It has been perfected to the point it can be safely used in humans, and has been for about a decade. The only real drawback is that medical grade-perfluorocarbon is ridiculously expensive... like, $800 bucks a litre expensive.

It doesn't "contain" lots of oxygen, that's entirely incorrect, however it is extremely (if not perfectly) permeable to oxygen and CO2, which means it can be used as a medium for respiration. So... the question becomes "why?"

Humans in critical care get put on Ventilators because they're just not up to breathing themselves. Ventilators do a pretty decent job of simulating human breathing, only the mechanic is backwards -instead of negative pressure from the lungs pulling air in, positive pressure from the machine pushes gas in, vice-versa with exhalation. Long term, this reverse motion starts to damage lung tissue; it's just hard on lungs.

Babies have an even harder time. They're freakin' tiny which makes it that much easier to damage their lungs, and their respiration rates are like... 4x an adults, which makes everything 4x as hard... and finally, most babies who require ventilation are young enough that their lungs aren't producing surfactant -which is basically a lubricant that allows airways to open up easily. Take two kleenex, soak them in water slap them together, then try and pull them apart -that's a baby's lungs without surfactant (take two paper towels, soak them in very soapy water, and try to pull them apart -that's an adult lung).

So, how perflurocarbon helps, is it allows for oscillation ventilation. Filling the lungs entirely with a thick fluid means the lungs no longer have to expand or contract at all (the article at Cracked implies that the mice were killed because their diaphragms couldn't move the fluid around -in all likelihood, the problem was they weren't getting fresh air). Oxygen is then pumped into the fluid in hundreds of bursts a minute, which provides a virtually continuous supply of fresh oxygen at the baby's alveoli. Edit: actually, now that I think about it, someone getting this therapy would probably need to have their normal breathing mechanic suppressed, and just trying to breathe the stuff would be pretty hard on the heart.

On a vaguely related note, previous to the 90s, a lot of premature babies had such a terrible prognosis because their lungs didn't produce surfactant (normally, fetal lungs start to produce surfactant by the time they're born). I recall watching an episode of Oprah, where a Doctor was explaining this wonder substance. She's all "what is it? where does it come from??" And he... has no idea, and vaguely redefines it as "a special substance." Meanwhile, I'm shouting at my TV "It comes from Cows! It's Cow Spit!" (truth).

Share this post


Link to post

First solid-state quantum processor created.

Spooky computers closer to reality

Solid-state quantum processing demonstrated.

Katharine Sanderson

Published online 28 June 2009 | Nature | doi:10.1038/news.2009.603

Corrected online: 3 July 2009

The new processor takes advantage of quantum entanglement.

The computers of tomorrow could be quantum not classical, using the quantum world's strange properties to vastly increase memory and speed up information processing. But making quantum computing parts from standard kit has proved difficult so far.

Now physicist Leonardo DiCarlo of Yale University, New Haven, and his colleagues have made the first solid-state quantum processor, using similar techniques to the silicon chip industry. The processor has used programs called quantum algorithms to solve two different problems. The work is published in Nature1.

Classical systems use a series of 0s and 1s, or bits, to convey information. Two bits, for example can be combined as either 00, 11, 01 or 10. But quantum systems have a property called superposition, where all these combinations can exist at once. This vastly increases the amount of information that can be stored and the speed at which it can be processed.

Quantum bits, or qubits, can also be entangled — the state of one qubit influences the state of another even at a considerable distance. A quantum computer would use entangled qubits to process information.

Solid work

Quantum algorithms have been processed before, but only in exotic systems using lasers or ions suspended with strong magnets. To make something more similar to a computer, a solid-state system is needed.

DiCarlo made his device out of two transmon qubits. These are tiny pieces of a superconducting material consisting of a niobium film on an aluminium oxide wafer with gaps etched into it. A current can 'tunnel' across these gaps — another special property of the quantum world, where waves and particles can cross barriers without breaching them. The two qubits are separated by a cavity that contains microwaves, and the whole system connected to an electric current.

"The appeal of our processor is that it is an all-solid-state device," says DiCarlo. It was made using standard industrial techniques. But the analogy with ordinary computers shouldn't be overstretched, he cautions — the device works at just a fraction of a degree above absolute zero and requires special refrigeration technology.

The researchers controlled the system using a microwave 'tone' with a frequency that causes the qubits to become entangled. A voltage pulse is then applied to control how long the two qubits remain entangled and in their superpositional state. Longer entanglement allows the qubits to process more complex problems.

DiCarlo was able to keep the qubits entangled for a microsecond, which is the state of the art, he says.

The system processed two algorithms written specially for quantum systems.

The first is Grover's search algorithm, also known as the reverse phone book search, where someone's number is known but not the name. The processor essentially reads all the numbers in the phone book at once to find the single correct answer. "At the end the qubit will be in one state, not superposed, and that's the answer," says DiLorio.

The second, more simple, algorithm, the Deutsch-Jozsa algorithm, tests whether the flip of a coin is fair or not.

DiCarlo's processor got the reverse phone book search right an impressive 80% of the time and the coin-flip algorithm right about 90% of the time.

To read out the answer, DiCarlo used a microwave tone at the same frequency as the cavity in the system. "Depending what state the qubit is in, the cavity will resonate at a certain frequency. If the tone is transmitted through the cavity, we know it's in the right state," he says.

But this technique could not read out the answer in a system with many more qubits, says quantum-computing expert Hans Mooij from the Delft University of Technology in the Netherlands. The development of the processor is good news Mooij adds. "This is a necessary step," he says. "If this can be done, the next thing can be done."

DiCarlo is cautious. "We've made a very simple quantum processor," he says. "It's by no means a quantum computer."

He is working to give the processor more qubits, and so more processing power. He thinks that scaling up to three or four quibits will be relatively straightforward, but beyond that the problem becomes a lot harder, and the coherence time needed will be very difficult to attain. Mooij agrees: "From three or four to ten they will need to make a big step again."

Share this post


Link to post

Superconducting Materials + Microwaves + Voltage Pulses - Heat (must be kept within a few degrees of absolute zero) = much faster computers with much moar memory.

To test it, they gave it a phone number and a phone book, and told it to find the person the number was for.

A regular computer would have to check each number, one by one, sequentially. It can do so very fast, but it still has to do it in order.

Quantum computer does it by looking at every number & name in the book simultaneously.

Share this post


Link to post

Memristor minds: The future of artificial intelligence (New Scientist)

Memristor minds: The future of artificial intelligence

* 08 July 2009 by Justin Mullins

EVER had the feeling something is missing? If so, you're in good company. Dmitri Mendeleev did in 1869 when he noticed four gaps in his periodic table. They turned out to be the undiscovered elements scandium, gallium, technetium and germanium. Paul Dirac did in 1929 when he looked deep into the quantum-mechanical equation he had formulated to describe the electron. Besides the electron, he saw something else that looked rather like it, but different. It was only in 1932, when the electron's antimatter sibling, the positron, was sighted in cosmic rays that such a thing was found to exist.

In 1971, Leon Chua had that feeling. A young electronics engineer with a penchant for mathematics at the University of California, Berkeley, he was fascinated by the fact that electronics had no rigorous mathematical foundation. So like any diligent scientist, he set about trying to derive one.

And he found something missing: a fourth basic circuit element besides the standard trio of resistor, capacitor and inductor. Chua dubbed it the "memristor". The only problem was that as far as Chua or anyone else could see, memristors did not actually exist.

Except that they do. Within the past couple of years, memristors have morphed from obscure jargon into one of the hottest properties in physics. They've not only been made, but their unique capabilities might revolutionise consumer electronics. More than that, though, along with completing the jigsaw of electronics, they might solve the puzzle of how nature makes that most delicate and powerful of computers - the brain.

That would be a fitting pay-off for a story which, in its beginnings, is a triumph of pure logic. Back in 1971, Chua was examining the four basic quantities that define an electronic circuit. First, there is electric charge. Then there is the change in that charge over time, better known as current. Currents create magnetic fields, leading to a third variable, magnetic flux, which characterises the field's strength. Finally, magnetic flux varies with time, leading to the quantity we call voltage.

Four interconnected things, mathematics says, can be related in six ways. Charge and current, and magnetic flux and voltage, are connected through their definitions. That's two. Three more associations correspond to the three traditional circuit elements. A resistor is any device that, when you pass current through it, creates a voltage. For a given voltage a capacitor will store a certain amount of charge. Pass a current through an inductor, and you create a magnetic flux. That makes five. Something missing?

Indeed. Where was the device that connected charge and magnetic flux? The short answer was there wasn't one. But there should have been.

Chua set about exploring what this device would do. It was something that no combination of resistors, capacitors and inductors would do. Because moving charges make currents, and changing magnetic fluxes breed voltages, the new device would generate a voltage from a current rather like a resistor, but in a complex, dynamic way. In fact, Chua calculated, it would behave like a resistor that could "remember" what current had flowed through it before (see diagram). Thus the memristor was born.

And promptly abandoned. Though it was welcome in theory, no physical device or material seemed capable of the resistance-with-memory effect. The fundamentals of electronics have kept Chua busy ever since, but even he had low expectations for his baby. "I never thought I'd see one of these devices in my lifetime," he says.

Though memristors were welcome in theory, no physical device seemed capable of the effect

He had reckoned without Stan Williams, senior fellow at the Hewlett-Packard Laboratories in Palo Alto, California. In the early 2000s, Williams and his team were wondering whether you could create a fast, low-power switch by placing two tiny resistors made of titanium dioxide over one another, using the current in one to somehow toggle the resistance in the other on and off.

Nanoscale novelty

They found that they could, but the resistance in different switches behaved in a way that was impossible to predict using any conventional model. Williams was stumped. It took three years and a chance tip-off from a colleague about Chua's work before the revelation came. "I realised suddenly that the equations I was writing down to describe our device were very similar to Chua's," says Williams. "Then everything fell into place."

What was happening was this: in its pure state of repeating units of one titanium and two oxygen atoms, titanium dioxide is a semiconductor. Heat the material, though, and some of the oxygen is driven out of the structure, leaving electrically charged bubbles that make the material behave like a metal.

In Williams's switches, the upper resistor was made of pure semiconductor, and the lower of the oxygen-deficient metal. Applying a voltage to the device pushes charged bubbles up from the metal, radically reducing the semiconductor's resistance and making it into a full-blown conductor. A voltage applied in the other direction starts the merry-go-round revolving the other way: the bubbles drain back down into the lower layer, and the upper layer reverts to a high-resistance, semiconducting state.

The crucial thing is that, every time the voltage is switched off, the merry-go-round stops and the resistance is frozen. When the voltage is switched on again, the system "remembers" where it was, waking up in the same resistance state (Nature, vol 453, p 80). Williams had accidentally made a memristor just as Chua had described it.

Williams could also show why a memristor had never been seen before. Because the effect depends on atomic-scale movements, it only popped up on the nanoscale of Williams's devices. "On the millimetre scale, it is essentially unobservable," he says.

Nanoscale or no, it rapidly became clear just how useful memristors might be. Information can be written into the material as the resistance state of the memristor in a few nanoseconds using just a few picojoules of energy - "as good as anything needs to be", according to Williams. And once written, memristive memory stays written even when the power is switched off.

Memory mould

This was a revelation. For 50 years, electronics engineers had been building networks of dozens of transistors - the building blocks of memory chips - to store single bits of information without knowing it was memristance they were attempting to simulate. Now Williams, standing on the shoulders of Chua, had showed that a single tiny component was all they needed.

The most immediate potential use is as a powerful replacement for flash memory - the kind used in applications that require quick writing and rewriting capabilities, such as in cameras and USB memory sticks. Like flash memory, memristive memory can only be written 10,000 times or so before the constant atomic movements within the device cause it to break down. That makes it unsuitable for computer memories. Still, Williams believes it will be possible to improve the durability of memristors. Then, he says, they could be just the thing for a superfast random access memory (RAM), the working memory that computers use to store data on the fly, and ultimately even for hard drives.

Were this an article about a conventional breakthrough in electronics, that would be the end of the story. Better memory materials alone do not set the pulse racing. We have come to regard ever zippier consumer electronics as a basic right, and are notoriously insouciant about the improvements in basic physics that make them possible. What's different about memristors?

Explaining that requires a dramatic change of scene - to the world of the slime mould Physarum polycephalum. In an understated way, this large, gloopy, single-celled organism is a beast of surprising intelligence. It can sense and react to its environment, and can even solve simple puzzles. Perhaps its most remarkable skill, though, was reported last year by Tetsu Saisuga and his colleagues at Hokkaido University in Sapporo, Japan: it can anticipate periodic events.

Here's how we know. P. polycephalum can move around by passing a watery substance known as sol through its viscous, gelatinous interior, allowing it to extend itself in a particular direction. At room temperature, the slime mould moves at a slothful rate of about a centimetre per hour, but you can speed this movement up by giving the mould a blast of warm, moist air.

You can also slow it down with a cool, dry breeze, which is what the Japanese researchers did. They exposed the gloop to 10 minutes of cold air, allowed it to warm up again for a set period of time, and repeated the sequence three times. Sure enough, the mould slowed down and sped up in time with the temperature changes.

But then they changed the rules. Instead of giving P. polycephalum a fourth blast of cold air, they did nothing. The slime mould's reaction was remarkable: it slowed down again, in anticipation of a blast that never came (Physical Review Letters, vol 100, p 018101).

It's worth taking a moment to think about what this means. Somehow, this single-celled organism had memorised the pattern of events it was faced with and changed its behaviour to anticipate a future event. That's something we humans have trouble enough with, let alone a single-celled organism without a neuron to call its own.

Somehow, an organism without a neuron to call its own had memorised a pattern of events

The Japanese paper rang a bell with Max Di Ventra, a physicist at the University of California, San Diego. He was one of the few who had followed Chua's work, and recognised that the slime mould was behaving like a memristive circuit. To prove his contention, he and his colleagues set about building a circuit that would, like the slime mould, learn and predict future signals.

The analogous circuit proved simple to derive. Changes in an external voltage applied to the circuit simulated changes in the temperature and humidity of the slime mould's environment, and the voltage across a memristive element represented the slime mould's speed. Wired up the right way, the memristor's voltage would vary in tempo with an arbitrary series of external voltage pulses. When "trained" through a series of three equally spaced voltage pulses, the memristor voltage repeated the response even when subsequent pulses did not appear (http://www.arxiv.org/abs/0810.4179).

Di Ventra speculates that the viscosities of the sol and gel components of the slime mould make for a mechanical analogue of memristance. When the external temperature rises, the gel component starts to break down and become less viscous, creating new pathways through which the sol can flow and speeding up the cell's movement. A lowered temperature reverses that process, but how the initial state is regained depends on where the pathways were formed, and therefore on the cell's internal history.

In true memristive fashion, Chua had anticipated the idea that memristors might have something to say about how biological organisms learn. While completing his first paper on memristors, he became fascinated by synapses - the gaps between nerve cells in higher organisms across which nerve impulses must pass. In particular, he noticed their complex electrical response to the ebb and flow of potassium and sodium ions across the membranes of each cell, which allow the synapses to alter their response according to the frequency and strength of signals. It looked maddeningly similar to the response a memristor would produce. "I realised then that synapses were memristors," he says. "The ion channel was the missing circuit element I was looking for, and it already existed in nature."

The behaviour of synapses looked maddeningly similar to a memristor's response

To Chua, this all points to a home truth. Despite years of effort, attempts to build an electronic intelligence that can mimic the awesome power of a brain have seen little success. And that might be simply because we were lacking the crucial electronic components - memristors.

So now we've found them, might a new era in artificial intelligence be at hand? The Defense Advanced Research Projects Agency certainly thinks so. DARPA is a US Department of Defense outfit with a strong record in backing high-risk, high-pay-off projects - things like the internet. In April last year, it announced the Systems of Neuromorphic Adaptive Plastic Scalable Electronics Program, SyNAPSE for short, to create "electronic neuromorphic machine technology that is scalable to biological levels".

I, memristor

Williams's team from Hewlett-Packard is heavily involved. Late last year, in an obscure US Department of Energy publication called SciDAC Review, his colleague Greg Snider set out how a memristor-based chip might be wired up to test more complex models of synapses. He points out that in the human cortex synapses are packed at a density of about 1010 per square centimetre, whereas today's microprocessors only manage densities 10 times less. "That is one important reason intelligent machines are not yet walking around on the street," he says.

Snider's dream is of a field he calls "cortical computing" that harnesses the possibilities of memristors to mimic how the brain's neurons interact. It's an entirely new idea. "People confuse these kinds of networks with neural networks," says Williams. But neural networks - the previous best hope for creating an artificial brain - are software working on standard computing hardware. "What we're aiming for is actually a change in architecture," he says.

The first steps are already being taken. Williams and Snider have teamed up with Gail Carpenter and Stephen Grossberg at Boston University, who are pioneers in reducing neural behaviours to systems of differential equations, to create hybrid transitor-memristor chips designed to reproduce some of the brain's thought processes. Di Ventra and his colleague Yuriy Pershin have gone further and built a memristive synapse that they claim behaves like the real thing(http://www.arxiv.org/abs/0905.2935).

The electronic brain will be a time coming. "We're still getting to grips with this chip," says Williams. Part of the problem is that the chip is just too intelligent - rather than a standard digital pulse it produces an analogue output that flummoxes the standard software used to test chips. So Williams and his colleagues have had to develop their own test software. "All that takes time," he says.

Chua, meanwhile, is not resting on his laurels. He has been busy extending his theory of fundamental circuit elements, asking what happens if you combine the properties of memristors with those of capacitors and inductors to produce compound devices called memcapacitors and meminductors, and then what happens if you combine those devices, and so on.

"Memcapacitors may be even more useful than memristors," says Chua, "because they don't have any resistance." In theory at least, a memcapacitor could store data without dissipating any energy at all. Mighty handy - whatever you want to do with them. Williams agrees. In fact, his team is already on the case, producing a first prototype memcapacitor earlier this year, a result that he aims to publish soon. "We haven't characterised it yet," he says. With so many fundamental breakthroughs to work on, he says, it's hard to decide what to do next. Maybe a memristor could help.

Justin Mullins is a consultant editor for New Scientist

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...